General Disclaimer: (HV) (DC) injury or death hazard, use at your own risk, may void warranty. |
All public logs
Jump to navigation
Jump to search
Combined display of all available logs of My wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 05:31, 15 December 2006 Cewert talk contribs uploaded File:Starting on the Top of Battery Box.JPG (Bottom is mostly assembled, now starting on cutting the angle irons for the top.)
- 05:29, 15 December 2006 Cewert talk contribs uploaded File:2 Trays with Some Supports.JPG (2 of the trays sitting on 2 1-1/2 angle irons (others just sitting there))
- 05:19, 15 December 2006 Cewert talk contribs uploaded File:4 Finished Trays.JPG
- 05:18, 15 December 2006 Cewert talk contribs uploaded File:Finished Tray.JPG
- 05:17, 15 December 2006 Cewert talk contribs uploaded File:Screws Sticking Through Partially Assembled Tray.JPG (I used extra long, self threading screws, so they stick through. I used a hacksaw first, and then a dremel with a metal cut off attachment to cut the screws at the base. Then used a grinder to grind them perfectly flat.)
- 05:14, 15 December 2006 Cewert talk contribs uploaded File:Closeup of Sample Finished Corner.JPG (This is just a sample I tried on a scrap pieces before doing the real thing.)
- 05:12, 15 December 2006 Cewert talk contribs uploaded File:Holes drilled in aluminum.JPG (Holes drilled in the aluminum. Used the dremel to drill through both angle irons in the same place, then drilled a larger hole in the top (so the screw would go through without threading and then countersunk it with a much larger drill bit.)
- 05:10, 15 December 2006 Cewert talk contribs uploaded File:Tray Parts Laid Out.JPG (All the parts of one tray laid out)
- 05:08, 15 December 2006 Cewert talk contribs uploaded File:Dremel Drill Press.JPG (This is the Dremel drill press I used to drill the small holes in the angle irons.)
- 05:06, 15 December 2006 Cewert talk contribs uploaded File:Almost Finished Tray Jig.JPG
- 05:04, 15 December 2006 Cewert talk contribs uploaded File:Making Tray Jig Step 3.JPG (Place wood to hold the channel irons in place)
- 05:02, 15 December 2006 Cewert talk contribs uploaded File:Making Tray Jig Step 1.JPG (Step one is to place wood around the outsides of the angle iron to hold the angle irons in place.)
- 05:01, 15 December 2006 Cewert talk contribs uploaded File:Making Tray Jig Step 2.JPG (The set together tray with batteries and wood secured in placed around the outsides to form the jig.)
- 04:58, 15 December 2006 Cewert talk contribs uploaded File:Tray Ready for Jig.JPG (This photo is of the tray set together on a sheet of plywood (wich will be used as a jig to hold everything in place for drilling holes.)
- 04:56, 15 December 2006 Cewert talk contribs uploaded File:Tray Set Together Close Up.JPG
- 04:55, 15 December 2006 Cewert talk contribs uploaded File:Tray Set Together With Battery.JPG
- 04:54, 15 December 2006 Cewert talk contribs uploaded File:Tray Pieces.JPG (These are all the aluminum pieces needed to build the 4 battery trays.)
- 04:51, 15 December 2006 Cewert talk contribs uploaded File:Cutting Aluminum.JPG